Pitch 3.96mm wire to board connector battery terminal connector
used in 3.96 mm housing
1.A3961series housing have A3961H-NP (suitable A3961 series
2,Housing used materials: PA66, Halogen Free , Fire-protection
rating is UL 94-V0 94-V2 . Minimum packing quantity is 1000pcs/bag.
3.Single row housing we have 2P~15P,The daily production capacity
is 30 to 50 KPCS.
4. Terminals are stamped by Brass or Phosphor bronze , E-Stamping
before Tin-plated ,Tin-plated we calling A3961-TBE or A3961-TPE ,
Minimum packing quantity is 4,000pcs/Reel. The daily production
capacity is 200 to 300 KPCS.
5. Terminals' wire range :AWG #18--#22 and AWG#14#20,insulation OD
|Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based
upon JIS C5402 5.4)||20mΩ (Max.)|
|Insulation Resistance||Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method
302 Cond. B)||1000MΩ (Min.)|
|Dielectric Withstanding Voltage||Mate connectors, apply 800V AC (rms) for 1 minute between adjacent
terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method
|Contact Resistance on Crimped Portion||Crimp the applicable wire on to the terminal, measure by dry
circuit, 20mV (Max.)., 10mA.||5mΩ (Max.)|
7A AC/DC maximum
|Voltage rated||250V AC/DC|
|Withstand voltage||1500V AC/minute|
|Insulation resistance||1000MΩ min|
|Contact resistance||10MΩ max|
|Operating temperature||-25 - 85°C|
The world's xinpei Plastic& metal electronic Co.,Ltd.to provide
customers with high efficiency service responsibility, forge ahead,
the endess pursuit
Except the plating ,From Design tooling, stamping ,Injection
molding, assemble, Testing ,packing .All the
step are doing by ourself. So we can control the quality.
1. Manufactured under strict controls.
2. ISO 9001:2008
3. UL Certification
4. Reach Cetitifaction
5. RoHS compliance
6. OEM for PULSE
7. Active Environmental policy
8. Every module tested 3times (not just batch tested)