wire to wire connector with 4.2mm pitch power cable connector dual
1, Detailed information of product feature
|Basic dimension information|
|Wire range||AWG22# to 26#|
|Wire insulation diameter||3.10mm Max|
|Terminal materials||Brass/Phosphor bronze material, tin-plated finish|
|Current Rating||9.0A AC, DC|
|Voltage Rating||600V AC, DC|
|Contact Resistance||10mΩ Max|
|Insulation Resistance||1000MΩ min|
|Withstanding Voltage||1500V AC/minute|
|Temperature range||-25℃ to 85 ℃|
|Terminal Insertion Force||1.50kgf (Max.)|
|Terminal/Housing Retention Force||3.00kgf (Min.)|
|Pin Retention Force||3.00kgf (Min.)|
|Latch Yield Strength||7.0kgf (Min.)|
|Panel Mount Retention Force||16.0kgf (Min.)|
|Other information please kindly check the following picture.|
2, Related drawing and report
Folllowing pictures are out testing report and exact engineering
drawing for your information, please kindly check it, wish it can
help you to get what you really need.
|Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based
upon JIS C5402 5.4)||10mΩ (Max.)|
|4-2||Insulation Resistance||Mate connectors, apply 500V DC between adjacent terminal or ground.
(Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)||1000MΩ (Min.)|
|4-3||Dielectric Withstanding Voltage||Mate connectors, apply 1500V AC (rms) for 1 minute between adjacent
terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method
|4-4||Contact Resistance on Crimped Portion||Crimp the applicable wire on to the terminal, measure by dry
circuit, 20mV (Max.), 10mA.||5mΩ (Max.)|
|5-1||Actuator Insertion & Withdrawal Force||Insert and withdraw connectors at the speed rate of 25±3mm /
minute.||Refer to paragraph 7|
|5-2||Crimping Pull Out Force||Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)||AWG#14||11.0kgf (Min)|
|5-3||Terminal Insertion Force.||Insert the crimped terminal into the housing.||1.50kgf (Max.)|
|5-4||Terminal/Housing Retention Force.||Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing.||3.00kgf (Min.)|
|5-5||Pin Retention Force||Apply axial push force at the speed rate of 25±3mm / minute||3.00kgf (Min.)|
|5-6||Latch Yield Strength|
Mate connectors and pull apart until both latches break at the
speed rate of
25±3mm / minute
|5-7||Panel Mount Retention Force||Insert the housing into panel cut out, push housing opposite the
way it was assembled until the locking barbs break at the speed
rate of 25±3mm / minute.||16.0kgf (Min.)|
|5-8||Durability||When mated up to 50 cycles repeatedly by the rate of 10 cycle per
minute.||Contact Resistance 20mΩ (Max.)|
Amplitude: 1.5mm P-P
Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each
(Based upon MIL-STD-202 Method 201A)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
Discontinuity 1 μsec.(Max.)
|5-10||Physical Shock||490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon
JISC0041/MIL-STD-202 Method 213B Cond. A)|
Q: Can we have our own brand packaging? How?
A: Yes,we have designer in house to meet customized packaging
requirment, all you have to do is let us know your idea or demands.
Q: Does your products print exactly the same as original?
A: Compatible products were known for its favourable prices and
accurate size as originals.
Q: What is your MOQ for sample order?
A: All size sample orders are welcome.we do understand your idea to
increase order gradually.
Q: What about guarantee?
A: One on one exchange for defectives exceed our guarantee rate.